The charging of the exhaust silencer shall be fixed to the end pipe. As a general rule, the charge is universal and can be installed on pipes of different diameter. The reference may be one of the following methods:

1. The draught shall be fixed by one or more of the bolts, which are bolted to the rear of the seam, in such a way as to be located in the exhaust silencing pipe and fix the pressure.

2. The attack shall be welding to the silencing pipe.

The silencer shall perform an exclusively aesthetic function and shall not affect the characteristics of the car in general and the exhaust system in particular.

Some nozzes are able to change the sound of the vehicle's exhaust, but tend not to be the best. The partitions that are installed inside the nozzie are incapable of giving a deep sound mute, but may well lead to unpleasant buzzing. Also, the nozzes that create additional sound make exhaust gas difficult, and this does not benefit the car engine.

It is often necessary to make a cut in the bumper, as on some vehicles the exhaust pipe is hidden. If the tip of the tip is bent, the nozzle shall be removed and the remaining straight piece shall be mounted.




Add comment

Security code
Refresh