The replacement of oil shall be performed after heating the engine up to the operating temperature.
1.Remove the cork of the oil filler.
2. If the bottom-damped vehicle is removed.
3. Remove the oil filler cap, drain the oil into some capacity.
4. Clear the cork, put on a new sealings ring and roll the pan pallet.
5. Cork.
6. Report oil. Start the engine, see if there's a leak.
7. If a car with a damped plate is damped, it must be mounted.
8. Check oil level, if necessary, report more.
9. Wait three minutes, check the oil level again, or make the desired amount of oil.
