If you mistake the catalyst at Toyota Camry, first of all, we need to check the webbing-most likely it has failed and needs to be replaced. The new lambda probe costs approximately 2,000 handlebars. If the replacement does not work, it will be necessary to install the inverts and do the cleaning of the catalyst.

Option to remove two: or punch a flange into a lambda hole that is located behind a catalyst. Inside, there's a hole in it. This will help to neutralize the problem. If the catalyst does not overheat and the trim does not help, the catalyst itself should be cleaned. He'll have to knock it out. There is one complication-the release system will work more noisily, and the silencer will get extra load. In this case, the small diameter of the small diameter at the outlet is the type. The diameter of the orifice shall be less than in the tube itself. That's where the lambda probe is needed. The diameter of the reduction is that the lambda would absorb less fumes and thus stop responding to the reshuffle.




Add comment

Security code
Refresh