Replacing the fuel filter with the Toyota Avensis 2

To change the fuel filter on Toyota Avensis 2 without replacing the entire assembly pump, you need to do the following: Remove the fuel tubes from the benzene. Using a screwdriver and a hammer to shoot down the stop ring of the pump counterclockwise. We put in a new filter and gather it all back.

1. Remove the back seat.
2. Disconnect fuel pipes from the pump.
3. With a screwdriver and a hammer, throw a stop ring of the gas pump counterclockwise.
4. Get the gas pump at the assembly.
5. Remove the remaining petrol from the pump.
6. Using a hairdryer to heat up the lower heat tube and steal it.
7. Remove the fuel level sensor and get the filter.
8. Unset a filter.
9. Heat up two pipes on the filter and also remove them.
10. We put in a new filter and gather it all back.

Add comment