Lambda lambda on the Toyota Avensis 2

To change a lambda probe on Toyota Avensis 2, you need to: Detach the connector from the sensor. Remove the exhaust manifold. Process Lambda-Probe WD-40 .By using a key "on 22" by a sensor. To connect the lambda probe connector.

1. Disconnect the connector from the sensor.
2. Release the exhaust manifold cover.
3. Process Lambda-probe WD-40.
4. Using the "22" key, we're spinning the sensor.
5. We're going to put a new lube sensor on the carvings and screw it up. Arm it with your hand.
6. Connect the lambda probe connector.