Replacement of the Skoda Octavia oil filter (Tour)

To replace the oil filter on Octavia A4, it is necessary to: Loosen the oil filter by removing the oil from the rubber gasket. After replacing the oil and filter, you should check the system for leaks. To do this, it's necessary to have an engine.

1. Loosen the oil filter and extract it
2. The sealing ring adjacent to the engine shall be thoroughly cleaned.
3. Oil rubber gasket seal.
4. Place a new filter on the spot and tighten it with your hands.
5. After you replace the oil and filter, you should check the system for leaks. To do this, it's necessary to have an engine.

Add comment