1) remove the trout from the ramp, prermark them for the correct inverse installation. Logan's got them very tight;
(2) take a suitable hose length of about 10 cm and circle it with a liquid to wash the injector or the carburettor, and the other end of the hose shall be inserted deep into the nozzle;
(3) Connect using the nozzle to the battery. To reduce the voltage, 21W should be included in the chain.
(4) Pulses shall be applied to the spray nozzle at the same time by closing/breaking contacts in order to simulate the work of the nozzle;
5) in this way, rinting out all nozzle 3-5 times, between which breaks of 5 minutes are made.