The need to repair the thermomuff at Mitsubishi Padero 3 can tell the engine to overheat, especially when traffic is in traffic. To repair it, you need to:
(1) The key "by 10" unscrew 2 bolts and remove the air intake.
(2) Remove the top cover of the air duct over the fan.
(3) The "14" spin button of the four retaining screws to secure the heat sink.
4) The key "on 10" unscrew the two screws on the fan assembly.
(5) The "10" key is to rotate the 6 fan-bolts.
6) Remove the fan assembly by remembering the direction of its rotation.
7) Removal of the cover.
(8) The "10" key is to remove the four screws of the thermomuff and pull it out.
9) On the coupler, remove the four screws and disassemble it.
10) PIMP 200 (up to 50 ml)
11) Gather all back.
