To replace the KIA Rio III candles, you will need several tools: 16 with a long handle (at least 20 cm) with a device to hold the candle after the roll out.
- The eternal key on 16 with a long handle (at least 20 cm) with a device to hold the candle after the winding.
- The Tortseva key on 10 is removed by the plastic skin of the engine.
Priority of actions:
- Roll out the four attachment bolts of the plastic cover of the engine (with the KIA logo).
- Under cover-four coils (bolted bolts) with wires attached to them. It is necessary to roll the bolts on which the reels are attached.
- The following should be removed from the U-belt anchorages where they are fixed on the valve cover, and remove the carcasses with the candlesticks.
- Then, use the candle key to retrieve and extract the candles.
- The installation of new candles is done in reverse sequence. It is recommended that the torque key shall be used for the incrutic period-20-30 N*m for protraction.