Quick-connect couplers are used to connect the hoses of the Honda Achcord 7 fuel system. Before they are disconnected, it is necessary to make sure that they are not contaminated to avoid contamination of the fuel. If you reconnect, you must use the new tabs. The connection shall be done as follows:
(1) Clean contact surfaces of the compound.
2) Insert a new lock into the connection body.
3) Remove the old retainer from the tube.
4) Insert the receiver into the retainer and release the lock latch with the opening in the connector housing until it is clicked.
5) Lightly pull the tube to test the reliability of the connection.