The pollution of the idle governor on Jill MK results in an unstable idling speed of the engine. The regulator needs to clean the regulator every 5-10 thousand tonnes. km The procedure is as follows: We take off the adhesive with ACBTW.It is located on the top node at the top.
- We're filming the ASB's tick.
- We find the regulator-it is located on the drossele node at the top.
Detach the slot from the regular rack. Using the TRAX T20 key, unscrew the thumbscrew and remove it.
- Disconnect the connector from the spin box.
- Use the T20 BRAX key to unscrew the adjusters and remove it.
We turn the knob down and clean it with carburetor cleaners. If you reverse the installation, you might want to change the governor's compaction ring.
- Flip the controller with the needle down and clean it with the carburetor cleaning aerosol.
- In the opposite case, it is desirable to change the compaction ring of the regulator.