The idle adjustment is performed after the replacement of the engine controller, the RXX valve, the throttle control, the throttle control, or the battery loss. The procedure is as follows:
(1) This includes the ignition.
2) Reset errors by the scanner.
(3) Turn off the ignition for 15 seconds.
(4) Including 5 seconds
5) Again turning off 15 seconds (for the Siemens D160 with ETS-by 35 seconds).
(6) Put CAT in position P or N and start the engine.
(7) For auto-mode ACPR, switch lever to position D by 1 sec and return to P.
8) Preheat up to operating temperature.
9) Include air conditioning for 10 seconds.
10) Transfer of lever to position D by 10 sec.
(11) Ignition switch.
12) Wait 15 seconds. The idle configuration process is complete.