Starting with the "tenth" family (2110, 2111 and 2112), MAZ vehicles have started to be picked by an electronic speedometer. If the VAZ electronic speedometer is out of order, the problem is likely to be the speed sensor. If the speed sensor of VAZ 2111, 2111, 2112, 2113, 2114 or 2115 is down, it must be changed. However, before you begin to replace the VAZ speed sensor, you should check it. How to check the speed sensor at the VAZ
How to check the speed sensor at the VAZ
The speed sensor at VAZ (2110, 2111, 2112, 2113, 2114 or 2115) is the easiest to complete without removing the sensor from the car. To test the speed sensor of VAZ, it is necessary to lift the car to the jack so that one wheel does not touch the ground. Connect the sensor contacts to the voltmeter (or tester in voltmeter mode) and start spinning the wheel. If the wheel rotates the voltage, it means that the speed sensor is sparing. If there is no voltage, the VAZ speed sensor is not operational and must be replaced. How to replace a speed sensor at VAZ
How to replace a speed sensor at VAZ
The replacement of the speed sensor on VAZ 2110, 2111, 2112, 2113, 2114 or 2115 is very simple and can be accomplished without difficulty. To replace the speed sensor, you will need only one key to 22.
1. Find the speed sensor-it is located on the right side of the engine protection (if facing the engine).
2. Remove the clamp from the speed sensor and turn the sensor itself back to 22
3. Remove the currently running speed sensor, replace it with a new speed sensor.
4. Reverse all order.
After replacing the speed sensor, the speedometer should start functioning normally and display the correct speed.
