If the rear backbearing Lifan Smiley has been overstretched or overstretched, even after a short run, he may have a stout and demand replacement. To replace the part, you need to do the following:
- Lift the car and take the wheel off.
- We're shooting the hub cap.
- The fruit-goers get a hard splint that is fixing the hub nut.
- Rinding the steps of the ring, and peeling a stubborn puck of the outer bearings.
- We're taking a step with the bearings.
- I'm gonna put on a sash and get an inside clip of a bearing.
- Teach the outer rings of the outer (A) and the bearing rings of the bearing.
- Pure hub seats and smeer them with a lithole.
- Watch out for the new bearings of the bearings.
- Put a lubricant on the bearings of the bearings and put in a lot of inner bearings in the hub.
- Put a lock on the garden and set a clip of the outer bearings in the hub.
- We're gathering it all back.