If the Lexus RX II is damaged, they should be replaced, but if not, they can be repaired.
To do this, you must do the following:
- The lower edge of the Pneumoelinte is trapped in a metal cup, which is welded to the shock absorber. We need to have a glass of mouth a little above the weld.
- Pair the shock absorber of the shock absorber and the glass together with the pneumoelement and separate the shock absorber.
- The buffer is being reconstructed in a workshop using the same technology as any other.
- Before the assembly in the glass of the shock absorber, it is necessary to drill the hole into the tube with the gilk for pumping oil and pressure after the restoration.
- The glass needs to be reintroduced with a sealed seam.
- Collect everything in reverse order.
This procedure will cost much less than the purchase of new shock absorbers.
