SilentBlock is an element of a suspension which needs to be regularly tested and replaced when necessary. If extraneous sounds or a car became less controllable while moving from the forward suspension, it is time to change the site blocks.

The replacement of the front sites on the VAZ 2108, 2109, 21099, 2110, 2111, 2112, 2113, 2114 and 2115 models is almost the same. Before changing the site, the machine must be backed into a pit and remove the protection of the engine compartment if it is installed. In addition, the replacement of the front sites in the VAZ 2109, 2110, 2114, etc., is as follows:

1. Roll out and remove the lower lever (for this, the fastening of the attachment to the body, the two mounting bolts, the clip nuts and the stabilizer bracket). If the nut clip rolls out with difficulty, you can twist it along with the crab, and then twist it into a vice.


2. Extract the site from the release lever. Some are trying to knock him out, but this way is fraught with leverage. It is much easier to burn a site with a torch or a gas burner. As soon as the site is lit, it will only be left to remove the remains from the lever.

3. Clear the hole of the lever to remove traces of the burnt ScientUnit.

4. Enforce a new site into the hole using a special tool. If you do not have a blender, you can use the manual materials: lock the lever in the clutches and try to lock the site into the hole with the screwdriver and then "squeeze it" using a piece of metal tube. Experienced motorists advise you to use soap solution to damp and sailor and the hole-so the rubber band will be much easier to use.

5. After the site has been inserted evenly into the hole of the lever, the chamois should be changed. First, we need to cut down the old one with the help of the chisel.

6. The new faces are inserted into the place and pressed into the clutches.

7. When the romats are in place, the lever can be collected. The assembly is in reverse order. Before tightening the bolts, it is recommended to lubricate them so that it is easier to unwind the next time.




Add comment

Security code
Refresh