The oil replacement procedure in the TOYOTA LAND CRUISER 200 is as follows:
1) Install the car on a flat ground.
2) Delaying 2 bolts and removing the damper box damper (12 Nm at the back of the installation).
3) Unwind 7 bolts and remove the protective cover of the valve chest (14 Nm at the back of the installation).
4) Open the filler and drain cork, remove the gaskets and flush the oil.
(5) Install a new filler cap.
6) End the cork with a torque of 37 Nm.
(7) Small amounts of fresh oil up to the level of the filler hole (the total volume is approximately 1.4 to 1.5 l).
8) Wait 5 minutes and check the oil level if necessary.
(9) A new pad and a curvature of 37 Nm is filled.
10) All the details are in place.