Removal of the propellant whistle at Mazda 6 I

If the heater fan starts to whistle at age 6 of the first generation, you must perform the following steps:

1. Eject the motor-heater's heater in the hull. He is behind the glove box and is fixed by three bolts.
2. Next, we need to extract the motor from the body.
3. Carefully disconnect the fan by unlocking the retaining screw at the back of the motor, and removing the handle.
4. To make out the motor, you need a little hammering to push off the clamps.
5. There are bearings inside. They're probably targets, but they're not much lubricant. We need to trim the compaction neatly, wash the bearings and put in a thick lubrication (for example, a lithole).

The assembly is in reverse order.