- If the coolant temperature control lamp on the Toyota Prius is lit or flashing, it is necessary to stop the car immediately if the air conditioner is switched on-turn it off.
- If the bonnet is in pairs, you must disable the hybrid installation, wait for the pairs to stop, open the hood, and start the hybrid installation again.
- If you do not have a pair, you must open the hood and verify that the cooling fans are working.
- If the fans are operating normally, wait until they stop and then turn off the hybrid installation.
- If the fans are not working, the hybrid installation must be disabled, further exploitation is not recommended, you must contact the service.
After the hybrid installation is cooled, it is necessary to check it for coolant leaks and if necessary, extend it into the expansion tank to Full.