The forced ventilation of the crater is performed on the Toyota Land Cruiser 200 as follows:
(1) The intake manifold shall be removed.
(2) Remove the engine cover.
3) The hoses hose assemblies are disconnected.
(4) The valve shall be removed.
(5) Connect the clean hose to the valve.
(6) blow the air into the hose at the head of the cylinder block. The air shall be free.
(7) Hose the hose on the other side of the valve and blow again through it. The air must be difficult.
(8) If the valve is operating normally, set it all back, pre-lubricating the sealing ring of the valve. The moment of the PCV valve is 5 Nm.