It is recommended that the NGK V-LINE BKR6E, EYQUEM RFC58LZ2E, SAGEM RFN58LZ, or CHAMPION RC87YCL spark plugs are recommended for the 8-valve manufacturer Renault Sandero 1.4 and 1.6. The replacement of the candles is made on the cold motor. This can be done by a compressor for paging. Then, using a candle-key or a high-head on a 16-out candle. If you do not have a candle-wrench, you can use the high-voltage wire to extract the lighted candles. The new candles need to be wrapped gently so as not to damage the carving. It is not possible to delay the threads in a very long way, since it may damage the threads in the head of the cylinder block.Rotate 90 degrees gives you the opportunity to compress the compacted washers without retract the threads.
- The replacement of the candles is made on the cold engine.
- First, we need to remove the tip of the high voltage wires and extend the fresh water wells with compressed air, because of the peculiarity of their location, the sand that can get into the combustion chamber can be pumped into them. This can be done by a compressor for paging.
- Then, using a candle-key or a high-head on a 16-out candle. If you do not have a candle-wrench, you can use the high-voltage wire to extract the lighted candles.
- New candles need to be wrapped gently so as not to damage the threads.
- If you do not retold, you should turn the knob (or handle of the candle key) to 90 degrees by reaching the end of the threads. It is not possible to delay the threads in a very long way, since it may damage the threads in the head of the cylinder block.Rotate 90 degrees gives you the opportunity to compress the compacted washers without retract the threads.
