The replacement of the oil with the Opel Vector B shall be carried out on the warm motor in such a sequence:

1) bet or lift the front of the car.

2) Unwind the oil cork.

(3) Lightly weaken the cork on the crankcase and put the oil reservoir under it.

(4) Filling the cork completely and with the oil.

(5) For the engine 1.7-put the receptacle under the filter, tear it down and with the hands. Lubricating the new oil sealing ring of the new filter and circling it with your hands.

For engine 2.0, remove the plastic skin of the engine, remove the lid of the oil filter casing, remove the replacement filter element and install a new one.

6) Stop the cork and put the car horizontally.

(7) Pour about 2 l. Butter and wait a few minutes for it to be glass in the crankcase.

8) The rest of the quantity of oil, continuously controlling the level of the probe.

9) Stop the filler cap and start the engine.

10) In a few minutes, jammating the engine, giving the oil a little bit of the stem and checking the level. If necessary, we'll pour.




Add comment

Security code
Refresh