In order to remove and purge the throttle on the 6G74 Mitsubishi Padero 3, the following actions are taken:
(1) The key "on 10" uncovers the four bolts of the plastic engine cover and remove the cover.
2) Shut down the connectors and disconnect the vacuum valve and the module from the intake manifold.
3) The key "on 12" twirt 4 bolts and remove the metal bracket.
(4) The "by 12" key is unfastening the mounting of the fuel hoses and pulling off the pipes to the side.
5) Remove the fuel filter cover.
6) The key "on 12" is the arm of the throttle control.
7) Unplug the hoses.
(8) The key "on 12" is the four bolt anchoring bolts and the flap removed.
9) After cleaning, collect everything in reverse sequence by installing a new pad.