- First, you need to rotate the hex bolt screw that covers the ingots.
- After that, you need to unroll the temperature sensor and move it to the side for comfort.
- After that, you need to rotate the bolts between the bolts, fasten the mounting bracket to the engine block, and unscrew the bracket.
- Then you need to clear the landing surface and install the gasket for the new oil filter adapter.
- Before you can install the adapter, you must have a previously removed oil temperature sensor.
- Then you need to install the adapter with a gasket, and place the temperature sensor on the installed adapter and set the oil filter to the adapter.
- All work will take half an hour to an hour.