To remove the control oil valve on the L3 Mazda 3 (I), you must: Disconnect the CRS and remove the filler plate. Then remove the high voltage wire and disconnect the controlling oil valve (OCV). Remove the ventilation, cylinder head cover and the control of the oil valve. Then measure the resistance between output A and the B omm. The standard characteristic is 6.9-7.9.
- Disable the PK and remove the filler plate.
- Next, remove the high voltage wire and disconnect the control valve (OCV).
- Remove the ventilation ducts, the cylinder head cover and the oil valve control itself.
- Then measure the resistance between conclusions A and B ommeter.
- Standard characteristic of the odometer reading: 6.9-7.9 Om.
- If measured from the norm, replace the control oil valve.
- Perform the installation in reverse order.
