To change the drive belt to Honda Accord 7, do the following:
(1) Disconnect the wire from the battery.
2) Feed the key "on 14" on the caster bolt. You can also use a balloon key as a lever to make the necessary effort.
3) Rotating the key clockwise, pulling the key.
4) Remove the old belt.
(5) By becoming a new belt in the sequence "bottom up". We're checking to see if there's a free cable in the pulley.
6) Check the tenor indicator. The tension pointer must be within the range.
(7) Start the engine, give it five minutes and again check the tension of the belt.