The oil replacement procedure and the filter on Honda Accord 7 is:
1) Pwarm the engine, put the car on a flat ground and turn off the motor.
2) Deter the bolt and remove the protective cover on the oil pan.
3) Unwind the cork with a Cheya.
(4) Sour old oil.
5) Put a new puck and twist the cork with an effort of 44 Nm.
6) Remove the oil filter.
(7) Establish a new filter, densification and carving of a small layer of new oil.
8) End the filter until the force becomes available, then turn it into the back of the revolution.
(9) Fill the new oil (approximately 4.2 litres) by controlling its level of the probe.
(10) Preheat the engine, check the oil level and, if necessary, spill.