For the throttle control of the throttle reel on Honda, 7, it is necessary to:
1) Remove the two bolts and remove the lid of the drive cable.
(2) Check cable. For this, the shift cable from side to side shall not be more than 12 mm.
(3) If the hatch exceeds the normal value, it shall be necessary to looser the counter-nut and rotate the adjustment nut until the hatch is in the required range.
(4) After adjustment, it is necessary to tighten the counter-nut and check the operation of the throttle control-it shall be completely opened when the pedal of the gas is pressed and the throttle completely closed when the pedal is released.