To remove fuel injectors at BMW 1 generation, we do the following: We turn off the ignition system and remove the plastic cover. Disconnect the crankcase ventilation system. We unplug the screws and screws off the distribution line. disconnect the fuel line. Disconnect the connector from the connector and remove the mounting plate from the nozzle. The hose assembly is removed from the cable. I need to change compaction rings if necessary.
- Turn off the ignition and remove the plastic cover of the engine.
- Disconnect the crankcase ventilation hose.
- Unwind the nuts and bolts, pull up the dislocation of the distribution line.
- Fuel line connecting.
- Disconnect the connector and remove the mounting plate with the nozzle.
- Remove the staples and disconnect the nozzle from the mainline.
- The installation is done in reverse sequence. I need to change compaction rings if necessary.
