Replacement of the rear semi-axles on RAV-4 shall be carried out on the lift or in the pit. The sequence of work is as follows:
-Remove the silencer;
-Scrolls and remove the shaft (s) of the shaft (s) (only the rear part can be removed);
-Unfastening the gear reducer. If the bolts are in the gas tank, you can untwist the differential bracket. You have to put the jack under the differential.
-Slowly lower the differential down and disconnect one end of the shaft of the shaft;
-pull down the ShRUS;
-With the help of a special lift or a screwdriver, press the old plant;
-Put a new sapper in his head.
-Set everything in place.
