Change the rear shock absorbers on Toyota Avensis 2 in this sequence: Remove the rear door edge of the back door, remove the rear door, remove the rear door, and remove the rear-wheel assembly. Pull the back of the connector from the rear end of the vehicle and disconnect the connector from the rear suspension lever. Adjust the shock absorbing of the arm of the arm, and we turn it back on.
- We're going to get the back door.
- Take the back seat.
- The floor trim and side trim are removed.
- Scratchin ' the car and taking off the back wheel.
- Disconnect the ABS sensor connector.
- Unwind the nut and disconnect the stabilizer bar from the rear suspension lever.
- The arm's crates.
- Scrolls the shock absorber to the lever.
- Scrolls 3 of the upper anchorages of the shock absorber.
- Scrolls the 2 bolts of the cable-management arm retaining arm.
- Scrolls the three bolts of the lever arm.
- Arm the lever and remove the shock absorber in the assembly.
- Compress a spring and uncover the top nut of the rack.
- We're changing the shock absorber, and we're going back.
