Replacement of the steps bearings with the Toyota Avensis 2

To change the steps bearings on Toyota Avensis 2, do the following: Rising a car and taking a wheel off. Gently put the new one and gather it all back.

1. Lift the car and take the wheel off.
2. Blowing the hub nut with a "32" key.
3. The "on the 13" key swinging.
4. The "10" key is unswinging the ABS sensor.
5. The "on 17" key is a swinging step from the lever.
6. The key to "17" is a draught.
7. The key is "22" with two bolts and a step.
8. Remove the phiking bracket and the brake disc.
9. I'm gonna get a stop ring.
10. Expressing the old bearings.
11. Gently put the new one and gather it all back.

Add comment