To change the heads of steelers to Opel Vetra C, you need to do the following:
(1) Lift the car and remove the front wheels.
(2) Meria the length of the free threaded part of the drive, or count as the number of turns.
(3) Holding the arrowheads, loosen the counter-nut.
(4) Rotate Finger nut to the arm of the pivot arm.
(5) Press the ball tip.
6) Completely unwind the mounting nut and remove the tip from the fist.
(7) Cruise the arrowheads from traction, counting the exact number of revolutions.
(8) By becoming a new tip, rolling it at the same speed.
(9) Manually tighten the counterparty.
(10) Install the ball finger into the rotary hand lever.
11) put a new self-contained nut and protract it.
(12) Permanently tighten the counterparty.