One of the most common reasons for the tapping of the Opel Vetra C on the Opel is the problem with the steering shaft. To avoid them, you can do the following:
1) Disconnect the minutes from the battery.
(2) In the engine compartment, lie on the engine and the key "on 13" to unscrew the coupling of the helmsman and the gear racks.
3) Remove the end of the drive from the shaft.
4) In the compartment, remove the light switch, get its block.
5) Replay 6 self-service and remove the front bezel.
(6) The second bolt of the helmsman's second bolt is to be released by the "8" key.
(7) Second end of the shaft.
(8) Install the end of the shaft in the clutches and, with the help of the snake, remove the tenured area.
9) Repeat the procedure for all the bearings of the crusader.
(10) Sold the bearings.
(11) If the problem is in the bearing (s), replace the cross-owl (for example, from the VAZ).
Place the cross in the plug and set everything in place.