Procedure to replace the working liquid of the automatic box on Toyota Avensis 2: We lift the cork and fill the box with the box. If necessary, we'll pour.
- Raise the car and put the tank under the box.
- Scrolling the cork and the oil.
- We're jamming the cork at 49 Nm.
- Through the probe, pour a new liquid in the same amount as it was made to the COOL level.
- The engine shall be started and idle by the selector lever over all positions of the carton.
- Do not stop the engine, check the level of the liquid and, if necessary, reach the COOL mark.
- Preheat the engine to the operating temperature and check the fluid level. If necessary, we'll pour.
