To install a short-around, you will need to have the same set of tools.
The first thing to do is to remove the gearbox handle. To do this, you have to rotate it and pull it up. After that, you need to twist two Samores in the coasters of the central tunnel and remove the plastic assembly with the cup holder. The seat warm-up buttons must be disconnected. Then we need to remove the front side of the tunnel, under which the fox is located. To do that, you need to twist two Samores, located under the coasters and one under the ashtray. It is also necessary to remove the plastic panels located to the left of the passenger's left leg and to the right of the driver's right leg.
The next step is to disengage the backstage from the gearshift mechanism. To detach the fox, it is necessary to roll the large bolts on the retaining screws. After that, you should remove the bearings, grease them and install them in the new one. You can now install the short-circuice. The other assembly is in reverse order.