To remove the front-wheel hub in Mazda 3 (I), you must: To remove the hub from the wheel of the wheel with a special device. If the inner ring of the bearings is left on the axis of the wheel, cut the inner ring of the bearings by means of a special device. Killed. Install the hub in the press and replace the bolts with the press. Install the new screws on the new protective cover and the turning fist. Install the new protective cover, the hub, and the new buttock.
- Beat the curved part of a countermob by a small snake and a hammer.
- Lock the step by pressing the brake.
- -I want you to spin a counter-nut.
- Place a hub in a vice.
- Remove the wheel hub from the shaft of a drive by means of a special device.
- If the inner ring of the bearing remains on the axis of the wheel hub, cut the inner ring of the bearing ring to a thickness of about 0.5 mm.
- Then remove the ring of evil.
- Remove the bearings of the wheel with the help of a special device.
- Label a protective cover and swivel pin for ease of installation.
- To remove the protective cover with the aid of the kill.
- Install the hub in the press and screw the bolts.
- Install the new bolts of the hub by using the press.
- Install the cover on the swivel.
- Align the labels on the new jacket and the swivel.
- To install a new protective cover, step, and a new counter-cage, stalling it.