To clean or replace the air conditioner filter on the TOYOTA LAND CRUISER 200, you must perform the following steps:
1) Include IGNITION ON and start the air recycling mode.
(2) Turn off the ignition.
3) Open the original box and remove it from the partition.
(4) Above the top of the filter cover, remove it.
5) Push and remove the filter at the edge of the filter body.
6) The filter and the compressed air of its compressed air for approximately 2 minutes at a pressure of about 5 bar. The filter arrow should be directed from you.
7) Put the old or new filter in the reverse sequence, paying attention to the correct positioning of the filter labels.