Setting of brake pedal height on Toyota Avensis 2

Adjust the height of the brake pedal to Toyota Avensis 2. To do this: We're taking the height of the mat. For cars with the IBC, it must be 148...158 mm, for models with ACPR-150...160 mm. The lower trim switch is removed. The connector of the stop-signal is removed by the counter of the switch.

1. We're taking the mat off.
2. I'm the height of the pedal. For MKAT machines, it must be 148....158 mm, for models with ACPR-150...160 mm.
3. We're taking off the bottom trim panel.
4. Detach the stop lamp connector.
5. Flights out the counterparty of the switch, taking it off.
6. Fly the counter-nut of the pedal.
7. Rotates the mashup and adjusts the height of the pedal.
8. We tighten the counterparty at 19 Nm.
9. Set the stop signal switch, rotating it to the pedal device.
10. Flip the switch to one turn.
11. Check the height of the pedal and tighten the counterparty of the stop lamps.