Check the height and free travel of the brake pedal of Lifan Smiley in this order: We press the pedal several times to remove the vacuum amplifier. It shall be 3 or 7 mm away. It shall be between 176 and 181 mm.
- We have a deep engine and we press the pedal several times to remove the vacuum amplifier.
- We press the pedal until the moment of resistance and measure the distance travelled. It shall be between 3 and 7 mm.
- Let' s get the rug, let go of the pedal and measure the height of her position. It shall be between 176 and 181 mm.
If the values differ from regulatory values, they can be adjusted:
- Disconnect the slot from the stop-signal switch and looser the stop nut and turn off the switch until the gap between the switch and the pedal is activated.
- Turn off the hard nut and turn the push-rod until the pedal's height is adjustable and tighten the nut clip.
- We're just finishing off the stop signals to the point of contact with the pedal pillow and closing the stop nut.
- Connect the connector back to the connector.