To replace the Hyundai Tucson salon filter, you need to:
1. Open the original box;
2. remove the two retainers symmetrically located on the sides by a finger from the outside;
3. remove the retainer in the right side of the bar by pulling it onto itself.
4. Delete the cover until it is fully down;
5. gently tighten the latches on the side of the cover of the coil filter to pull it onto itself.
6. Remove the filter and replace it by first inserting into a box or immediately into the opening opening;
7. To gather everything in reverse order.
The procedure will take you no more than 5 minutes.
