First of all, it is necessary to remove the door corner (where the VHF speaker is installed), with its screwdriver. Then, remove the panel underneath the door in the closed area, also with a screwdriver. There are two screws that need to be turned off. Now remove the plastic filler, located in the top of the door, and unscrew the screw that is beneath it. Under the red reflector, the bottom of the door also has a screw that needs to be turned off. You should now push the edge of the door behind the door handle, opening the opposite edge, and pulling it out. There's one more screw that needs to be turned off.
The binder's on the plates, six of them. The binder needs to be careful not to damage the clips.
The assembly is in reverse order.