On the side perimeter of the door-from below and from the side of the lock-turn away the screws. Then, remove the screw from the front side of the plating (it is not visible in the closed door). Remove the screws inside the lock handle of the lock and the arm of the holder.
Lightly lift the handle of the handle from the lock, move it against the move until it exits the door. A thin-blade-screwdriver on the mirror handle. The panel is fastened by the tabs, so the door panel should be removed with a little effort from the bottom to the bottom. Lift the bezel up until the lock button lock is clicked.
Remove the panel from the door to the maximum distance that will allow the wiring to be made to the glass control buttons. Push the button on the window-lift button (it is on the inside) and gently push it out. Remove the panel. Remove the mounting bracket of the panel in the area of the arm's arm. Carefully take off the film and fold it, avoiding the gluing. Completed. The disassembly time is 15 minutes. The assembly is in the reverse order.
In order to facilitate the connection of the connector, before installing the panel, you should extend the window opening in the area of the glass control buttons on the inside of the panel. Tightout all screws, bolts, and nuts on the doors and panels to prevent their sliding and creaking. Before setting the position of the brandy from the opening handle, it must be inserted into the lock on the door, and you must also ensure that the driver does not slip out of the retainer when the release handle is placed in the cover. The thumbscrew plate inside the opening handle has a secret head. After you have installed the filler on the mirror control handle, you must turn it around gently to the panel.