Removing the door plating on the Audi 100 C4

We're doing a door lining for the fourth generation of the fourth generation Audi, in this order:

1. Scrolls the handle of the window-lift handle (the bolts are underneath the decorative lining).
2. Scenting the power switch (if there is one) and remove the tie breaker box. When the mirrors are manually adjusted, the both wheels are removed with a screwdriver.
3. Insert a Phillips screwdriver in the bottom of the interior door handle.
4. Let' s remove the insertion and screw the two screws.
5. Get the bar forward before the door opens.
6. Detach the door-opening mechanism and disconnect the cable from the back of the door.
7. Uncover the front and rear screws at the outside of the binder.
8. Let' s take off the rubber gasket.
9. Shake on the bottom of the armpits, lift it up.
10. We're off the plating.

Add comment