The salon filter is necessary for purified air. The salon filter is installed in the plant far from all cars, but it is almost always the place to install it. If the salon filter is not installed in the plant, you can install it yourself. In some cases, you will have to make some adjustments. There are two most common places where a salon filter is installed: In the glove compartment before the passenger's knees: to get to the salon filter it is necessary to open the glove box, get all the contents from it, detach the rear anchorages and the cover shock absorber, if there is one, push the cover forward. It will be either a box with a filter or a filter. As a rule, a box or a series of air traffic is indicated in order to be able to understand how to orient the filter during the installation. Behind the inside of the windshield, the lining is usually divided into two parts. The filter shall normally be located on the passenger side. The laying is secured by the carrion or the paistons. The masonas need to be extracted and found a salon filter. The new filter must be installed in the same direction as the old one.
- In the glove compartment before the passenger's knees: to get to the salon filter it is necessary to open the glove box, get all the contents from it, detach the rear anchorages and the cover shock absorber, if there is one, push the cover forward. It will be either a box with a filter or a filter. As a general rule, the direction of the airflow is indicated on either the box or a series, so that you can figure out how to orient the filter during the installation.
- In the lower part of the windscreen outside the car, the filler is generally divided into two parts. The filter shall normally be located on the passenger side. The laying is secured by the carrion or the paistons. The masonas need to be extracted and found a salon filter. The new filter must be installed in the same direction as the old one.
The column filters are paper and coal filters. The lower salon filters are capable of detaining smaller particles in the air. As a result, the cleaner air in the passenger compartment and less dust in the plating panels.
