To check the correct operation of the parking brake on Mitsubishi Pajero 4, you need to pull it up to the point and count the number of clicks. If it is different from the nominal values (6-7 Click), adjust the handbrake in the following order:
1) Remove the central console panel.
(2) A lighting nut with a manual brake cable.
3) Rise the rear of the car and remove the rear wheels.
(4) In the wheel brake, the control of the parking brake control shall be removed.
(5) The regulator shall not be blocked until the brake disc is blocked.
6) Rotates the controller clockwise by five clicks.
(7) Rotating the alignment nut to adjust the parking brake lever.
8) Check the operation of the handbrake and put everything in place.
