It is necessary to dismantle the wiper mechanism. You do this by completing the following steps:
1. The removal of the decorative caps, which shall close the place of attachment of the caretaker of the caretakers to the trapeze.
2. Open the hood, unscrew the nut fastening key and remove them.
3. The decorative panel may be attached to both the plastic nuts and the pistons-it depends on the year of issue.
4. To access the trapeze, the rubber gasket that is placed on top of the grille should be removed.
5. Then it is necessary to retract the key by 10 and screw the bolts that attach the trapeze to the body.
6. The experience of Octavia owners indicates that the problem is most often found in the tulks-to understand them, it is necessary to uncover nut by 10 in the center of trapeze.
7. In order to disassemble the bushings, the screwdriver must be removed and the washer removed.
It should be noted that it is rather tight, and it is necessary to pull it so as not to rip the threads off. In order to prevent it, it is desirable to disassemble not only the tuller, which is mutton, but also the second one.
8. In the end, it is necessary to clear the tulls from dirt, grease, and then reassemble.