If you want to replace the drive cable with Reno Flüense, do the following:
- Raise the car and remove the front wheels.
- Remove the front end of the wheel arches and front bumper.
- Remove the battery pack and the shelf.
- Unwind the air filter.
- I'm spinning the bonnet.
- The lower lining of the mean pillar and the front door threshold shall be removed.
- Scrolls the bolts 1 and move the headlamp in the direction of 2.
- Remove the tabs 3 and the soundcard. 4
- Disconnect the bonnet cable from the cable.
- Unscrew the screw 6 and disconnect the drive handle 7.
- We're taking off the hood of the bonnet.
