If you don't work the rear door lock Reno Flüense, you can try cleaning it out. To do this:
- Remove the back door upholstery and the sealing film.
- Scrolling the outside door of the back door.
- Disconnect the slot 1 of the lock plug-in.
- Unwind screw 2 and remove the pad 3.
- Disconnect the outer handle module.
- Disconnect the connector 5 and disconnect the wire at point 6.
- Unwind the bolts 7 and lift the lock to get it off the hook.
- Remove the lock from the module and disconnect the cable.
- We're checking the work, clean, change the lock, if necessary.
- We put everything back in sequence. The bolts of the lock bolt are performed in this sequence:
