The installation will require the keylock itself with the opening sensor (the sensor is not sold separately) and a key of 10.
You must open the hood and remove the clips installed on the sides of the heat sink on the inside. Then remove the plastic cover that is attached to these clips. The lock is opened. We need to remove the cable with the metal ball at the end of the rope, and then release the fixture by squeezing it with plastic "ears". The stew grew up with the option, so that he wouldn't be in the way. Now the key to 10 is to twist the three bolts on which the lock is held and remove it. The contacts of the new lock must be located in the hole behind the lock and the new lock must be put in place. The lock must be connected to a slot in the slot.
The vehicle shall then be displayed on the screen of the vehicle computer when the hood is open and the hood is not closed.
